P32 sticking rear caliper
I drove my 2002 Winnebago Sightseer 27c P32 for the first time in a couple of months. I had to a little bit aggresively apply the brakes at a light. When I started up again, the engine labored more ...
Forum Discussion
I got the rear and crossover rear at O'Rileys. I found a place that can make up the front in stainless steel braid. Based on my experience with using SS braid with motorcycles, this should firm up the pedal.
He suggested I bring the hose in. That could create a problem in the shop because they would have to take it off and let this thing sit until the new hose arrived. Looks like the front and rear calipers are the same (side to side). Are the hose ends the same for the front as they are for the rear? If so, I could just show him the rears I have and he can make them up based on that, as long as I have the length.
Does anyone have the length?
He suggested I bring the hose in. That could create a problem in the shop because they would have to take it off and let this thing sit until the new hose arrived. Looks like the front and rear calipers are the same (side to side). Are the hose ends the same for the front as they are for the rear? If so, I could just show him the rears I have and he can make them up based on that, as long as I have the length.
Does anyone have the length?
