dougrainer wrote:
Take the black control module cover OFF. Look at the epoxy that the resistor and such are mounted in. IF the Epoxy is Yellow/Beige, REPLACE the control module. Dometic had bad modules 20 years ago and the symptom was intermittent check light and no fire on LP. If the epoxy is greenish, then your module is current, look for a dirty burner, bad spark electrode or bad re-ignitor. Doug (one of those Service Center Techs).
Thanks, Doug (one of those Service Center Techs), I appreciate the tip. I'm sorry I have such a low opinion of service centers, but I have had several BAD, experiences.
I know there are excellent techs out there and a few BAD apples spoil the whole barrel. I used to own a auto repair shop, fired 21 people before I found the people that I wanted to man my shop.
I wish there was a crystal ball that told which ones were good.
