Forum Discussion
Hogrider1
Jan 10, 2014Explorer
Removed electrode and gas valve, cleaned electrode and checked air gap at 1/8". checked and cleaned orifice, checked gas pressure, reassembled and no change. Installed new dinosaur fan 50 board and furnace took off as it should. Bad board.
Fan sail switch was a bit sticky at first but it cleaned up after a few cycles on and off. Road test to follow to see if it stays lit.
thanks for the help all!
Fan sail switch was a bit sticky at first but it cleaned up after a few cycles on and off. Road test to follow to see if it stays lit.
thanks for the help all!
About Motorhome Group
38,766 PostsLatest Activity: Jan 29, 2026