HWH Levelers-Final Fix?
I have followed the threads regarding HWH levelers that won't retract. I also have one leveler that partially retracts, then giving it the silicone treatment it retracts fully. It doesn't look as if...
Forum Discussion
I took an old toothbrush, some rags and WD-40 and cleaned all around the seal area on my slowly retracting jack. There was a lot of built up crud there, once it was cleaned out, the jack retracted fine.
May not solve your problem, but for a few minutes of your time and next to no cost, it's worth a try.
Best Regards!
May not solve your problem, but for a few minutes of your time and next to no cost, it's worth a try.
Best Regards!
