Trouble bleeding brakes
we have a 2007 class C ford E450 chassis. I decided i wanted to flush the brake fluid out as it was getting dirty looking. I did it as i would any of my cars- clear hose on the bleeder screw leading t...
Forum Discussion
cjalphonso wrote:
It could be the master cylinder. When brakes are working normal, the plunger only travels a short distance and may build up a ridge at its stopping point. When you bleed the brakes and your foot goes to the floor it pushes the rubber plunger past the ridge and can tear up the rubber causing a bad seal.
I hope this is not the case, but ask me how I know :(
OUCH again! it's only got 40k miles on it, so i hope that isn't it...
