What did you do to your Class A MH today???
This is always a fun thread to watch, so I thought I would start one here.
Forum Discussion
Saturday - installed eight plywood shims under my KWIkee II slide. When I first installed the sucker, I tried to get by putting it on the floor of the bay. The clearance over the lip of the bay door opening was minimal at best and once I got the slide loaded up, and it sagged a bit in the middle, the clearance was gone. So.... I cut eight 6 x 6 inch shims out of 3/8" plywood, loosened the eight bolts (four on one side and then four on the other) and shimmed it up. Problem solved.
