wheel simulator installation
Trying to figure out how to get my front wheel simulator back on. Tire shop took the wheels off to replace the tires, then couldn't get it back on. Problem is, the simulators are held on by nut...
Forum Discussion
Look inside the cap nut that holds the simulator on. The hub extender may be inside that. Remove the extender from the cap nut using a proper size hex wrench. Use the same hex wrench to install the extender onto the wheel lug. Do not use lock tight or anything like that.
On Lazy Daze mid bath the two wrenches (the hex and "T" handle for the cap nut) were normally kept in the rear passenger side with the spare tire. It may be inside the wheel or behind the spare.
John
07MB
On Lazy Daze mid bath the two wrenches (the hex and "T" handle for the cap nut) were normally kept in the rear passenger side with the spare tire. It may be inside the wheel or behind the spare.
John
07MB
