Still looking for a schematic for an intelletec 750 EMS.
If Iam "seeing" things right, I Have power coming off the "rear AC" breaker into the ems board. It "appears" there are 8 black wires going into the ems board, four hots off the breakers into 1,3 5, & 7, and four goung "Out" 2,4,6 & 8.
When I open the water heater breaker, I lose power on 1 and 2.
rear ac breaker killls power on 3, never any power on 4
washer dryer breaker kills power on 5 and 6
front ac--- 7 & 8
As Ido not have a washer dryer, I am going to swap the wires between 4 and 6.
This will move the hot for the reatr ac from a non functional output to the output intended for a washer dryer I don't have, and hopefully restore power to the rear ac.
wish me luck.