Sagging headliner
The headliner on our 2007 Itasca Navion is sagging: I'll be grateful for advice on how to reattach it, and also for any advice on whether this Means Something (say, water leak), or if it's just...
Forum Discussion
I had an old s-10 pu that did similar. Need to remove the entire piece that it was adhered to. Then pull the fabric off the backing material. Remove any deteriorated material or foam between the fabric and backing material. Use spray-on contact adhesive and reapply the fabric to the backing. Very tedious and just one shot to make perfect. Although does not have to be perfect to look tons better and function perfectly. A bit of an art project.
