Slide broke

You actually have 8 cables. You cannot even access the motor and cable mounts in 20 minutes. AND, if the broken cable has untwisted then removing will be a pain. I estimate a minimum of 2.0 hours to do a cable on a Accuslide system. While the on line video looks simple enough, UNTIL YOU ACTUALLY do a few, you realize the difficulty is extreme. 90% of the time, getting the OLD unstranded cable OUT is a pain, especially thru the rollers. Since it is now broken and unstranded, you usually cannot use the Chinese Fingers tool they supply with the new cable kit to easily route the new cable thru the rollers. I figure a Novice will take up to 4 or 5 hours to do the job. Doug

Accuslide instructional video

You will need tools. This is a do it yourself if you want, most techs don't know how unfortunately or they don't want to do it.

Fifteen minutes to replace is a bit optimistic I think.

The replacement cable is sdold on amazon it is 15.00 takes about 20 minutes