Slideout Woes
I have an older MH with a single 14' slide. When I arrived at the MH today, I noticed that the slide had partially opened (and yes, I had the safeties on...it literally pulled one out of the floor). ...
Forum Discussion
Executive wrote:
On mine there are two solenoids, one to push the slide open and one to pull the slide shut. When one fails it allows the other to override it. Check your slide fluid level first, then check to see if you have two solenoids...switch them if you do and see if it retracts....good luck...Dennis
NEVER swap HWH solenoids. The odds are you will destroy the 3 o-rings when pulling them out. Then they WILL leak externally. EVERY solenoid I have replaced, the original o-rings had nicks or were torn apart. HWH will sell those O-rings, but the odds are the solenoids need replaced anyway if no external leaks. The new solenoids have O-rings. Doug
