Spartan dashboard engine gauges question
On the round Spartan gauges, right below the needle shaft, there is a small red light. Among other things, this light begins to blink on 4 gauges when I try to start the engine. The problem seems to b...
Forum Discussion
Tom/Barb,
I had already assumed that blinking red lights probably was a warning. And, this feature would be very useful whenever I'm driving down the highway. However, in this case, the voltmeter, oil pressure, water temp, and trans fluid temp gauges are all blinking their red lights. Therefore, I'm more directed towards your suggestion regarding the codes for the engine. I'm going to disconnect the chassis batteries completely(all cables) and wait about 20 minutes before reconnecting, and attempting to start the engine. Right now, having a technician come out to take a reading is not an option. I will have to drive the rig to Cummins. I'll report later. Thanks
I had already assumed that blinking red lights probably was a warning. And, this feature would be very useful whenever I'm driving down the highway. However, in this case, the voltmeter, oil pressure, water temp, and trans fluid temp gauges are all blinking their red lights. Therefore, I'm more directed towards your suggestion regarding the codes for the engine. I'm going to disconnect the chassis batteries completely(all cables) and wait about 20 minutes before reconnecting, and attempting to start the engine. Right now, having a technician come out to take a reading is not an option. I will have to drive the rig to Cummins. I'll report later. Thanks
