Swivel seat base in Chev 4500/Sunseeker 2250
I had posted on this previously, but cannot find the thread in the archives. It appears RV.net doesn't return results between a year old and 2013... D'oh! So... Way back a few years ago I purchase...
Forum Discussion
Final results:
I painted the base again, this time in place after installation as GM's studs are white, and stand out in contrast to the black base:
In the normal travel position, the seat is now the correct height, but is shifted toward the center by an inch:
The only detriment to dropping the base is when the seat is facing the rear - it is now 1 3/4 inches lower.
But I like it. When we have a crowd, that tends to be my place to get out of the way. I prefer setting there anyway, so it has become "my spot"!
I painted the base again, this time in place after installation as GM's studs are white, and stand out in contrast to the black base:
In the normal travel position, the seat is now the correct height, but is shifted toward the center by an inch:
The only detriment to dropping the base is when the seat is facing the rear - it is now 1 3/4 inches lower.
But I like it. When we have a crowd, that tends to be my place to get out of the way. I prefer setting there anyway, so it has become "my spot"!
