Thermostat sensors 2013 Itasca Ellipse
I am looking for the zone sensors. I found one in the alcove between closets. Assume that is zone 1 for bath and bed. Can’t find 2 and 3. I think 3 is in warm area up front as thermostat reads warm. A...
Forum Discussion
From the Winnebago/Itasca Owner's Manual for the 2013 Ellipse regardless of what model you have:
• ZONE 1 - Bedroom Bath Area
• ZONE 2 - Living/Galley Area
• ZONE 3 - Front Cab Area
Depending upon which model you have, for the QD Model, Zone 2 sensor located in galley, located to the left of range, just under the countertop edge. Zone 3 located on driver's side, toward top right side of the TV/Fireplace area. Cannot speak to the GD model.
• ZONE 1 - Bedroom Bath Area
• ZONE 2 - Living/Galley Area
• ZONE 3 - Front Cab Area
Depending upon which model you have, for the QD Model, Zone 2 sensor located in galley, located to the left of range, just under the countertop edge. Zone 3 located on driver's side, toward top right side of the TV/Fireplace area. Cannot speak to the GD model.
