third passenger bed for Popular 210 (2010)

I am still wayne_tw wrote:
My problem with it is storing the apparatus required to make that bed in a vehicle with already very limited storage capacity.

Check my link to the pvc bed setup I mentioned earlier. The pvc parts are not glued together but they friction fit tightly together. I store the parts in the left side compartment between the rear sofa and the wheel well. They fit in that small compartment nicely along with a few other small items.

My problem with it is storing the apparatus required to make that bed in a vehicle with already very limited storage capacity.

We have a 2007 Roadtrek 210 P and have used the third seat bed since purchase new. Our daughter, about 5' is the one that uses it. We store the mattres on the street side twin bed made up from the motorized couch. Has worked for us. If we want to relax on the twin bed we place the mattres between the two front seats.

I built a PVC pipe frame that uses the 3rd seat back with the driver and 3rd seat bottom to create a mattress. I made it for my 5'-10" son to sleep on. He has not tried it yet. I have laid on it and I think it would work. Take a look and see what you think.

https://groups.yahoo.com/neo/groups/roadtrek/conversations/topics/81026

https://groups.yahoo.com/neo/groups/roadtrek/photos/albums/1158047397/lightbox/

Pete
2006 Roadtrek 210P

I've seen one, on an older Roadtrek. It was very short and narrow. I would say more for a child or a small adult. I've seen pictures on here, but, you may have to dig for them, it's been a while.