Forum Discussion
srx-6
Sep 14, 2020Explorer
I have all 3 new Penguin II units installed and running (all zones and all modes). I purchased a separate control module to be used with the auto generator start feature. What I did not know is that I need a "wiring kit" for the extra control board. Will be looking for one of those this week.
In the process of replacing the ac's I have lost power to the Magnum energy display that is attached right below my new T-stat. At first the T-stat would not work but found a bad fuse. The fuse for the EMS is good. I looked for a fuse at the Magnum unit in the bay but did not find one.
Any ideas would be appreciated.
In the process of replacing the ac's I have lost power to the Magnum energy display that is attached right below my new T-stat. At first the T-stat would not work but found a bad fuse. The fuse for the EMS is good. I looked for a fuse at the Magnum unit in the bay but did not find one.
Any ideas would be appreciated.
About Motorhome Group
38,705 PostsLatest Activity: Jan 14, 2025