Dennis37
Mar 24, 2014Explorer
Transfer Switch Location
My 2004 Pace Arrow (30A) is modified so I use a separate power input for the second a/c that comes from the gen 20 A CB output.
This has worked well for the last three years.
Now this input has no effect, and both a/c's are being powered through the normal 30A input. I can monitor the current through that input and see the increase in current as the a/c's come on line.
I assume (yep I know what that means) the 20A from the gen line goes through the xfer switch and that is my problem. If so does anyone know where it is located? Or have a wiring dig. of the system.
Thanks
This has worked well for the last three years.
Now this input has no effect, and both a/c's are being powered through the normal 30A input. I can monitor the current through that input and see the increase in current as the a/c's come on line.
I assume (yep I know what that means) the 20A from the gen line goes through the xfer switch and that is my problem. If so does anyone know where it is located? Or have a wiring dig. of the system.
Thanks