Trouble with my Motosat dish

I gave away our Motosat and went to the Traveler. Have you tried to reload the software ? Usually that corrects any problems.

Moisheh

Thanks for the replies. Yesterday we were just south of Redding Ca. with bad weather and Dish showed
"Complete signal loss". Today we are in Bakersfield with clear skies and all is well. I know that with my Motosat Controller sooner or later we will be not be able to get anything unless we upgrade to a new controller or a complete new dish. I can't really complain as we have gotten many years of perfect service
from this system. Too bad they went out of business.

You should be able to lock onto either 110, 119, or 129 (western arc satellites). A couple of things to try:
1) Make sure the coach is level; if not, it can affect the elevation and azimuth settings.
2) Depending on the receiver, you should be able to go to Menu, select 6 (system setup), then 1 (installation), then 1 (point dish). Set the satellite to 119 (if that's the one you want), then make the dish search until you get a decent signal strength.

I'm stating this from memory, as I don't have my coach at the house. Also, I have a different brand of antenna (KVH Tracvision S2), which is very old and not really supported any longer, so I have to force a lot of manual searching to get the satellite I want. I apologize if this isn't helpful.

So is it not allowing you to have certain channels? Dish has several satellites, some for HD some for non-HD. If you are missing channels I'd understand.

Triker33 wrote:
Replace it with a Trav'ler that never needs software updates.

The Motosat is built quite sturdy in comparison to the Trav'lr and is in great shape so I'd rather not go thru the hassle of removing it from the roof and installing a completely new dish.

Replace it with a Trav'ler that never needs software updates.