Tv problem
Hi all I am changing the tv in the bedroom for one with a larger screen, the old one runs absolutely fine it has a power lead and ariel that goes in the ant socket (see photo)I have taken the Ariel ou...
Forum Discussion
fishingbob61 wrote:
Did you do a scan on the new TV ?
Bob
Bingo, For "Ariel" also is called OTA (over the Air) you HAVE to do a channel scan for available Channels. You CANNOT just attempt to input lets say Channel 04(4.1 digital) and get that channel. The TV MUST have scanned and loaded that channel into its memory. Now, if you get NO Pic or display at all, just a blank screen and you cannot even display the set up screen, that would point to a defective TV. BUT, you MUST be in the OTA (air/antenna) input to get the MENU set up screen. IF the TV is set to HDMI 1, HDMI 2 or any other input, the MENU set up screen will not come up. So, on the remote with TV ON, try to select the AIR/Antenna input and see if it displays a screen. Doug
