Water Pump
The 12 volt water pump in my DIY van conversion pumps too fast. Do any of you well versed in electronics know what type of resistor or rheostat I could use to slow the pump down. I was thinking of a...
Forum Discussion
The pump I am using is similar to the one below. It is a small RV water pump that runs on 12 volt with a 1.7 amp draw. The manual pump handle was corroded badly so I replace lines the inside of the faucet above the sink with a small clear flexible tube and eliminated the pump handle and just use the 12 volt switch to run the pump. It runs too fast so now I want to add a rheostat or resistor to slow the pump down.
