What did you do to your Class A MH today???
This is always a fun thread to watch, so I thought I would start one here.
Forum Discussion
Replaces the bottom and a shelf on the bathroom cupboard. The plastic coated particle board was falling apart. Replaced with 1/2" Baltic Birch plywood left over from another project. A coat of exterior primer and two coats of gloss exterior white paint they will out last the rig!
The tech arrived today to investigate the non working HWH jacks. Of course when he tried they worked perfectly! Some investigation on his part found the culprit: Either the burnt fuse holder with a corroded fuse in it, the wire with worn insulation possible grounding out, or both. Fuse holer and three others and the wire replaced.
Also added a watering device to the 4 GCs. Much easier!
Edited to fix typo
The tech arrived today to investigate the non working HWH jacks. Of course when he tried they worked perfectly! Some investigation on his part found the culprit: Either the burnt fuse holder with a corroded fuse in it, the wire with worn insulation possible grounding out, or both. Fuse holer and three others and the wire replaced.
Also added a watering device to the 4 GCs. Much easier!
Edited to fix typo
