What did you do to your Class A MH today???

Still waxing, this thing seems to be a lot bigger than it was last year. Two more trips to the storage building and it "should" be completed. After that, maybe a shoulder X-ray.

Nick

Well how about I tell you the things I've done over the last two weeks. I removed the front TV sometime ago and finally got around to installing a flatscreen it it's place. Love the new FC. Got the quadrajet rebuilt and reinstalled, tuned and smogged for registration, installed new carpet runners, installed Camco vent cover, sanitized the FW tank, removed all the stuff the DW had been storing from her sewing room while we has guests sleeping there, washed the linins and made the bed prior to taking off Tuesday, washed the MoHo inside and out, cut out some plywood to fill in the space where the bdrm TV is in order to put in flatscreen. Bought a neat little reading light for over the passenger side seat and have it mounted on a piece of door skin ready to install, rewired the HVAC panel with new fastons that grip tightly and installed a new bezel I made for the HVAC panel and found out it's too thick and must be redone. Leaving for PNW Tuesday and cleaned up bedroom for DD to use while we're gone. Going out to look for a new camera today after seeing the Dr. So much fun.

Replaced the midcoach reflectors with LED turn signal blinkers. Easy job (3 hrs) and what a great look! Also a better indicator while changing lanes then the blinkers on my side mirrors.

Replaced the bedroom A/C, and got the dash A/C repaired, and new spark plugs and wires. Runs so much smoother...

Put in stainless camping cookware, so we can keep the Cuisinart stainless in the house. Cuts down on weight and gives us more storage space, too -- not that we've ever filled L'Andante up, even when we were living in her.

Plugged her into her own brand new RV 20/30/50 outlet, too.

Replaced a side marker light and am having the right exhaust manifold gasket repaired.

Removed the CAC last week. Repair shop said they could not fix it so had to order new core. Hope to have back tomorrow so I can begin to put her back together.

measured for new shades for lounge slide..
yesterday spent several hours and a few cold drinks trying to clean said shades with a variety of misc. cleaners that had zero affect on the stains from po
tomorrow i look at the front sway bar to see if the bushings are sound and maybe make the adjustment i have read soooo much about

I installed Sumo Springs on the front of my 2001 Bounder about two weeks ago. We then went on a 500 mile evaluation trip to see if the installation made any improvement on the handling and ride. I am happy to say that our coach handled much better and rode softer, we hardly noticed being passed by semis, busses etc. and vice versa. The prices on these units have come down considerably for older coaches and I now consider them reasonable for purchasing and installing.

Wired in a toggle switch and relay so I can turn off the activation of my trailer brake controller when using the engine compression brake. Also changed a burnt out light bulb in my transmission temperature gauge.

Mike.

Just finished waxing the rv. Took me 9 hours to do the whole thing. Its 35 feet. I have the time so elected to do it myself. Was at Lazy Days camping and the day we were leaving a man showed up and they had a sale of $5.00 a foot. AT the time we had to get back home so I was unable to let him do the work.