Who has removed bell cranks?
My coach (in sig) drives absolutely terrible. All p30’s drive bad but mine is becoming dangerous despite the thousands of dollars ive put into it. I was under it while a helper was turning the steerin...
Forum Discussion
Those OEM bushed bell cranks were a piece of junk from the start. Bushings need a little clearance to perform properly. The bearing bell cranks from Henderson have no clearance (play).
There is a lot of pressure on those bell cranks to change the steering motion 90°, thus slop in the steering wheel.
You did a good thing spending a few $$ with Henderson.
Richard
There is a lot of pressure on those bell cranks to change the steering motion 90°, thus slop in the steering wheel.
You did a good thing spending a few $$ with Henderson.
Richard
