Winegard Travler "NO LNB Voltage"
I have a slightly more than two year old Trav'ler System installed on my Tiffin Phaeton using Directv SMW system with an HR 54 main box and two Genie's. System has worked perfectly since installation...
Forum Discussion
This is a months old thread, but perhaps my expirience could help for others with the same issue...
I know that when I got that 'No LNB voltage' error message, Winegard asked me to change that cable up top. I tried a 6' cable I happened to have with me, and still the same error. A couple weeks later, found another commercially made 6' cable in a thrift store. Decided to try that instead of the one I'd installed. Once that was in place the error message went away.
So make sure you have a good cable up there.
I know that when I got that 'No LNB voltage' error message, Winegard asked me to change that cable up top. I tried a 6' cable I happened to have with me, and still the same error. A couple weeks later, found another commercially made 6' cable in a thrift store. Decided to try that instead of the one I'd installed. Once that was in place the error message went away.
So make sure you have a good cable up there.
