Xantrex inverter/converter problems
Our Xantrex 458, 2000W, MSW, inverter/converter keep tripping one of the two 20amp breakers. The top breaker controls all the inverter controlled circuits inside the rig and it keep tripping. The ot...
Forum Discussion
Normally, the setup is this way.
1 AC breaker supplies the AC power to the Inverter/Charger.
The AC power then come from the Inverter/Charger to a breaker panel, which controls all the AC outlets.
You must have the 15D or the 20D. Both circuit breaker go to the loads.
Look at page 6
Link to Manual
1 AC breaker supplies the AC power to the Inverter/Charger.
The AC power then come from the Inverter/Charger to a breaker panel, which controls all the AC outlets.
You must have the 15D or the 20D. Both circuit breaker go to the loads.
Look at page 6
Link to Manual
