3 output SK-3005 Conversion to SWM-8
I got stuck with one of the SK-3005 dishes which only has 3 outputs instead of the 4 required for using with a SWM-8. I won't go into the whole story but, to make a long story short, I thought I was b...
Forum Discussion
It sounds like he has a very viable solution. "The only resolution I have heard of is running a new 4th cable from the LNB, down the arm and wrapping an external cable around the base to allow for rotation."
In that case I wouldn't hesitate to add the coax, run it on the roof and down to the required location. Lots of calk and Dicor and it solves the problem.
In that case I wouldn't hesitate to add the coax, run it on the roof and down to the required location. Lots of calk and Dicor and it solves the problem.
