Carryout second receiver setup?
Now that my Dish Network HD issue is resolved I'd like some input on my other issue. I have a carryout connect to the LR receiver which now works perfect. The second receiver is connected to the BR...
Forum Discussion
You must connect the BR receive to the coax where the LR receiver is located. Once connected you must follow the correct procedure for doing a Check Switch routine. Starting with the power to the antenna off and then powering on after everything is hooked up do the entire setup. Once that is complete and you have a successful SW64 (or 42 if not an HD receiver) you can move it back to the BR and you will be able to watch any channel broadcast from the same satellite that is being viewed in the LR. You will never be able to watch 2 channels from different satellites at the same time.
