Convert winegard sk3005 to swm
Afternoon, Just looking for confirmation on someone who has done this.. I am thinking of buying a Winegard 3005 from craigslist and have read it can be converted to SWM model if I change the LN...
Forum Discussion
You really do not want to install the SWM inside. You will make your job much more difficult than necessary. Use 4 short jumper cables to run between the base of the Trav'ler to the SWM and then connect your existing cables to the outputs. If you like, install the SWM where it is located under the reflector of the antenna when stowed.
It's fully weather proof buy you need to use compression fittings on the coax cables and some di-electric grease in the F connectors to ensure long term success.
It's fully weather proof buy you need to use compression fittings on the coax cables and some di-electric grease in the F connectors to ensure long term success.
