Convert winegard sk3005 to swm

Bill.Satellite wrote:
No, that is not correct. You will first need to verify that the SK-3005 has 4 coax outputs available at the base and not only 3. If there are 4 then you will just need to add a SWM8 switch and a PI29 power inserter inside the coach.
There are many threads about this but you can look at the Winegard SWM setup .pdf here:
http://www.winegard.com/kbase/upload/2452282.pdf

Bill you installed my SK3005 in Jan of 2011 near Quartzsite.
Do you know if it has 4 coax outputs?
We are going to sell the rig and I would like to be able to tell a new owner if it can be converted to SWM with a SWM8.

Only the 3 port/4 port issue. Otherwise, if you are confident that the unit actually does work and you are paying a reasonable price, the antenna is a great antenna.

As always Sir, thank you for the information. One followup question.

Do you see any issue buying a used unit? Parts if needed etc?

No, that is not correct. You will first need to verify that the SK-3005 has 4 coax outputs available at the base and not only 3. If there are 4 then you will just need to add a SWM8 switch and a PI29 power inserter inside the coach.
There are many threads about this but you can look at the Winegard SWM setup .pdf here:
http://www.winegard.com/kbase/upload/2452282.pdf