Forum Discussion
Bill_Satellite
Jun 01, 2014Explorer II
No internal components need to be replaced.  You will need the RP-SK21 mount, arm, LNB, wiring and RP-SK11 the Dish Network dish (reflector).
This will give you a whole new mount for the dish and arm plus the Dish LNB.
http://www.winegard.com/dealer/training/TRAVLER%20Antennas%20Module.pdf
Here are the instructions for making the change. Scan down to page 9.
This is your one and only choice other than removing and selling your current mount and installing a new SK-1000 (my personal recommendation).
This will give you a whole new mount for the dish and arm plus the Dish LNB.
http://www.winegard.com/dealer/training/TRAVLER%20Antennas%20Module.pdf
Here are the instructions for making the change. Scan down to page 9.
This is your one and only choice other than removing and selling your current mount and installing a new SK-1000 (my personal recommendation).
About RV Must Haves
Have a product you cannot live without? Share it with the community!8,804 PostsLatest Activity: Oct 28, 2025