Converting to SWM Diplexers, splitters ok?
Directv came to the house and upgraded me to a new SWM LNB and three new HD-DVR's. I bought an extra SWM LNB, power inserter and 4 wide splitter from the tech for $30 (going rate on Ebay)to convert my...
Forum Discussion
ploiselle wrote:
Here is a link that might help.
I am using a sk3005 with a swm8. 2 HDR boxes and a 1 HD box. The OTA and cable go into a Winegard SensarPro TV Signal Meter and then to the SWM 8. I am using a diplexer at each TV.
I am using a mechanical pushbutton switch to switch between the rear TV and the outside TV as there is a decent loss when using a SWM splitter.
Paul
So if I am reading this right, the SWM 8 will combine OTA and sat signal (which I can run to the rear TV) and uncombine it with a SWM diplexer? Then use two AB swithes to the bedroom and out side TV? That way you can have OTA on one tv and sat on the other at the same time.
