Dead NOOK.
Hee hee. I thought I was fair at soldering but when the umbilical port socket broke away from the board. Not pin head size pads - pin point. Wave soldered at the factory. I have 90% remaining batte...
Forum Discussion
for wireless charging, you need both the receiver/charge pad
That goes on the outside of a phone/device, (inside if the device is big enough)
And the charging station, which is usually a round puck/plate
You place the phone/device on
You can get receivers for approx $10 on Amazon
Transmitter/station/inductors range from $20 up
I would suggest staying away from up right stands designed for a specific phone device
As they may not align probably with receiver placement inside an ereader
Afaik they charge at a slower rate than a wall wort
Designed for convenient overnight use
That goes on the outside of a phone/device, (inside if the device is big enough)
And the charging station, which is usually a round puck/plate
You place the phone/device on
You can get receivers for approx $10 on Amazon
Transmitter/station/inductors range from $20 up
I would suggest staying away from up right stands designed for a specific phone device
As they may not align probably with receiver placement inside an ereader
Afaik they charge at a slower rate than a wall wort
Designed for convenient overnight use
