Forum Discussion
Bobbo
May 08, 2015Explorer III
The only challenging part is aiming the antenna, and the installer can't do that for you because you do that at each campsite.
1. coax cable from antenna to receiver
2. coax cable from receiver to tv
3. plug in receiver
If you are trying to re-use the "cable input" the RV already has, you may or may not be able to do that. And the installer won't have a clue. BTW, mine would not work, I had to run a new coax cable from the outside of the MH to the location where I put the receiver. The installer definitely won't do that.
1. coax cable from antenna to receiver
2. coax cable from receiver to tv
3. plug in receiver
If you are trying to re-use the "cable input" the RV already has, you may or may not be able to do that. And the installer won't have a clue. BTW, mine would not work, I had to run a new coax cable from the outside of the MH to the location where I put the receiver. The installer definitely won't do that.
About RV Must Haves
Have a product you cannot live without? Share it with the community!8,801 PostsLatest Activity: Jun 18, 2025