Direct tv splitter
I'm wondering if somebody can give me the spec's for a 1 to 2 splitter for Direct TV so that I can run 2 TV's off of one lnb. I bought one at Best buy that I thought should work. It worked to an exten...
Forum Discussion
Executive wrote:
To run TWO televisions off a ONE LNB dish you'll need a multiplex switch. See link below. You'll need to run TWO coax cables from your sat dish to your multiplex switch. From the multiplex switch run one set of coax to your front DTV box and the other set to your rear one. This assumes, of course you're using DVRs. If you're using only the basic DTV box then you'll only need one coax from the multiplex to each box.
I added an extra coax from the outside compartment so I could use the external dish if the dome was blocked by trees. I then added a set of A-B switches from the multiplex switch. The top, or A is for the top dome and the bottom, or B is for the external dish......Good luck...Dennis
Multiswitch
What type/ brand of AB switch did you use EXECUTIVE
