Dish 1000.4 to Hopper 3 Installation
I have a Dish 1000.4 and standard LNB for both WA and EA. I have been told that I do not have to switch out my dish and lnb if I use a DPH 42 switch. I understand that I need three cables from the LN...
Forum Discussion
TechWriter wrote:
Solo and Duo Nodes aren't used with Hopper 3s. Hybrid Solo Hubs and Hybrid Duo Hubs are used with Hopper 3s.
However, if you're just using a single Hopper 3 (and no Joeys), you can connect the output from a DPH42 or a DPH LNBF directly to your Hopper 3.
Tom, I haven't tried it since I need a Solo Node on our 1K4 for the Joey, but does the "direct connect" without the Node also apply to a DPP LNB connecting to a Hopper 2?
