HELP! Setting up sat TV in my RV
Here is what I want to accomplish; I want to have satellite television in two rooms (independent of each other) of my RV with as little modifications to the existing coaxial wiring that was installed ...
Forum Discussion
sorry, what kind of RV?
I just completed this on my 2013 Keystone alpine, but for Directv.
I had a wire from outside to the living room tv location, and the key wire from the living room to the bedroom location.
so I was able to get sat to the LR, to a splitter and go back to the bedroom location.
orange (outside to inside location)
black(coax) and grey (lr to bedroom) are existing wires
red is new
it sounds like you have a coax from living room to bedroom also.
according to the page for the receiver, it looks like you should be ok, if you have this second wire
1 Agile modulated coaxial output to distribute programming to a remote TV location
here is my diagram
I just completed this on my 2013 Keystone alpine, but for Directv.
I had a wire from outside to the living room tv location, and the key wire from the living room to the bedroom location.
so I was able to get sat to the LR, to a splitter and go back to the bedroom location.
orange (outside to inside location)
black(coax) and grey (lr to bedroom) are existing wires
red is new
it sounds like you have a coax from living room to bedroom also.
according to the page for the receiver, it looks like you should be ok, if you have this second wire
1 Agile modulated coaxial output to distribute programming to a remote TV location
here is my diagram
