Gdetrailer wrote:
It should be noted that ATSC TV tuners do not give the actual channel frequency that is being used,
Every one I have used (I have never used a VIZO) you can go into the menus and usually add channal, manual add, and it gives either what I call the carrier channel or both the carrier channel and the actual frequency.... (That is the frequency the station broadcasts on)
Your Sensar Pro (in an RV) will show the Carrier channel so I use tune the TV to the station that almost is good. then go to manual add and change nothing but note the carrier channel.. set the Sensar Pro to the same number.. and peak the signal.