Mounting a Winegard Pathway X2
I need to mount the above receiver to my TT. I have a couple questions. What type of screws and what length should the screws be for mounting to the rubber roof? I'm a beginner RVer. Also, do the sc...
Forum Discussion
Please don't leave an X2 on your roof unattended. It WILL blow over and roll off the roof if the winds get into the 35+ range. It would only take one good gust and....there you go....
You could mount it to the roof with some screws and washers through the 4 tent stake hole plus maybe 4 more screwed through the same base. The issue would be sealing those hole to ensure no leaks. The area where the antenna rotates is NOT sealed but rather designed to drain water away. That means if you do something to seal it to the roof you will be sealing the draining water inside the antenna and pooling on your roof. There is no chance that you will have a happy result with this kind of an installation.
You could mount it to the roof with some screws and washers through the 4 tent stake hole plus maybe 4 more screwed through the same base. The issue would be sealing those hole to ensure no leaks. The area where the antenna rotates is NOT sealed but rather designed to drain water away. That means if you do something to seal it to the roof you will be sealing the draining water inside the antenna and pooling on your roof. There is no chance that you will have a happy result with this kind of an installation.
