texasredeye wrote:
Tom_M wrote:
If the RCA cables are RG-6 or RG-59 coax, you can cut the RCA connectors off and install F connectors. Or you could use and adapter such as this:RCA-to-F adapter
yeah, problem is...the cables leading from the TVs are video, audio L, and audio R. They are simple cables bound together. The RF connections on the Quest are single. How do I connect three separate lines into one RF connector?
The video cable (yellow connector) is the only one you can use. Audio cable (red and white) can not be used for an RF signal. I assume your intent is to distribute the antenna signal.