Questions Re: DirecTv Transponder Signals
When I setup my dish I always use the built-in signal strength meter with my receivers. The screen always defaults to satellite 101 and Transponder 1. I always use this default setting to zero-in my...
Forum Discussion
A couple of things come to mind.
The output power levels may vary due to individual transponder
characteristics.
Since each transponder transmits on a different frequency and the passband gain of the receiver may not be completely linear, there could be variations because of that.
The output power levels may vary due to individual transponder
characteristics.
Since each transponder transmits on a different frequency and the passband gain of the receiver may not be completely linear, there could be variations because of that.
