Forum Discussion

MustangDan74's avatar
MustangDan74
Explorer
May 20, 2018

Replacing original TV hookup with a Winegard SensarPro

Hey folks, I bought the Winegard SensarPro to replace my original TV hookup but I'm wondering, the cable would run from my original plate to the back of the TV. With the SensarPro am I going to need g...
SoundGuy's avatar
SoundGuy
Explorer
May 20, 2018
I mounted my SensarPro in an electrical surface mount box and brought the television cable out the side of the box where it couldn't be seen. The box was also necessary because the wall the original wall plate was mounted on wasn't deep enough to accommodate the SP and the stiff cables that connected to it.

About RV Must Haves

Have a product you cannot live without? Share it with the community!8,793 PostsLatest Activity: Aug 22, 2023