Redsled2006 wrote:
aslakson wrote:
We got an DMI splitter from Monoprice.com (around $40) and a 50ft HDMI cable to run to the rear of the rig. Works like a champ, long as you don't want separate programming on the two units.
al
The point was NOT to run 50 foot of cable when the present coaxial cable that came from the RV MFG will carry the HD signal.
CO-AX
it will carry OTA RF HD broadcast signal , NOT HDMI
HDMI "digital" signal from the Sat box "REQUIRES" THE Multi-strand HDMI cable,
there is MULTIPLE signals being sent on that cable
NOT modulated RF
what you would require is a HD RF modulator to create broadcast digital RF to be carried via coax
HD video over coax it will cost a lot more than installing a new cable
