Setting up a RAID 0 LSI SER523 Rev B2 4 Port.
I have a "new to me" Dell T7500 workstation. Win7-64 4TB, 3Tb, 2Tb and 250Gb HD. The OS is on the 250Gb "C" drive. The other drives are only for data. 1 Should I plug the data large hard drives...
Forum Discussion
If the drive is a SATA drive plug it into a SATA port. You may have different ports that use a different controller. Look in your manual, and see what ports go to what controller, and then enable that controller in the Bios. You can also change whether it is AHCI, SATA, PATA, etc... more than likely, so read your manual, and if you don't understand something Google the setting, and find out what it means.
