Setting up a RAID 0 LSI SER523 Rev B2 4 Port.
I have a "new to me" Dell T7500 workstation. Win7-64 4TB, 3Tb, 2Tb and 250Gb HD. The OS is on the 250Gb "C" drive. The other drives are only for data. 1 Should I plug the data large hard drives...
Forum Discussion
Spec sheet from Dell for that system claims 2TB per drive, 5 drives, 10TB max... so your big drives will likely not work correctly, unless you connect them to a separate new controller that specifically supports large drives.
datasheet
I dug up your service manual... looks like the system has both an SATA controller, ports SATA0-3 and an SAS (serial attached scsi) contrller, ports HDD0-3
The information in the service manual conflicts with the datasheet, I'm guessing there's more than one generation of the T7500 out there.
service manual
datasheet
I dug up your service manual... looks like the system has both an SATA controller, ports SATA0-3 and an SAS (serial attached scsi) contrller, ports HDD0-3
The information in the service manual conflicts with the datasheet, I'm guessing there's more than one generation of the T7500 out there.
service manual
