Setting up a RAID 0 LSI SER523 Rev B2 4 Port.
I have a "new to me" Dell T7500 workstation. Win7-64 4TB, 3Tb, 2Tb and 250Gb HD. The OS is on the 250Gb "C" drive. The other drives are only for data. 1 Should I plug the data large hard drives...
Forum Discussion
TenOC wrote:GordonThree wrote:
I dug up your service manual... looks like the system has both an SATA controller, ports SATA0-3 and an SAS (serial attached scsi) contrller, ports HDD0-3
So which connection is "best" SATA 0-3 or HDD 0-3 for my large drive ??? . . . :h
SATA would be my bet, you'd know it if you bought a 4TB SAS drive, they are considerably more expensive and harder to source
