Forum Discussion
Bobbo
Apr 19, 2015Explorer II
If it's not a SWM, you don't have to convert to SWM. A non-SWM LNB should have at least 2 coax connectors. Run a line from each RV to one of those connectors. If it is SWM, and has more than one connector, do the same. If it is SWM and has only 1 connector, use the splitter referenced above. It should not be a problem under any conditions.
Only the SWM system will let you run multiple receivers IN EACH RV, or a DVR using both tuners. If each RV has only 1 receiver, and does not want DVR multiple tuner capability, you don't need the SWM.
Only the SWM system will let you run multiple receivers IN EACH RV, or a DVR using both tuners. If each RV has only 1 receiver, and does not want DVR multiple tuner capability, you don't need the SWM.
About RV Must Haves
Have a product you cannot live without? Share it with the community!8,793 PostsLatest Activity: Aug 22, 2023