What RG6 connectors do I need?
I have a roll of double insulated RG6 and a big supply of black connectors. I have a stripper similar to professional installers and the compression tool. My problem is that I can't get the connectors...
Forum Discussion
Back in the old days, I prepared the tips with a knife and peeled the shields back, before pushing the connector on. I used two pairs of pliers to compress the connectors. I have since acquired the stripper and compressing tools and after watching the pros I stopped peeling the braid back. That's when it became so difficult. I peeled the braid and foil shields back on the last couple I did and it was much easier. Don't know why this never dawned on me before. I always use a VOM to check my jumpers before using them.
