Winegard Traveller T4 or DISH Wally Problem?
Need some help getting pointed in right direction. Here are the facts: DISH diagnostics screen reports satellites 110, 119 and 129 all with strong signal and “locked”. But switch status only shows ...
Forum Discussion
lryrob9301 wrote:
Remove the "Sat In" coax from the Wally receiver. Now run "Checkswitch" til the receiver says it can find no satellites. Select SAVE for this option. Turn everything off. Now re-connect the coax to the "Sat In" on the Wally and re-start the antenna and Wally. It should now receive all three satellites.
Bingo! Thanks, that did it! Appreciate your help very much.
