Winegard X2 Satellite receiver?
Are these connected to the TV in your RV via a conventional coaxial cable thru the port where you normally hook up to cable TV? Do you then just put the receiver inside, connecting the input line and ...
Forum Discussion
The basic setup is one coax cable run between the receiver (inside you coach) to the Pathway X2. You connect the receiver to your TV and it works. You will be able to use this setup with the Dish PAYG service and there are no additional fees. You can find the current pricing for the PAYG service here:
Dish PAYG
The only issue is the coax connection between the antenna and your receiver. As mentioned, the "Cable" connection will not work as it is setup from the factory but may be able to be modified with an A/B switch to use with one or the other. If you are not familiar with your coach wiring you will need to talk to someone knowledgeable about your coach. You can see if there is a forum for your specific model RV or chat with a dealer about setting up this option. It's always best to run a new dedicated cable to ensure the best connections but not always necessary.
Dish PAYG
The only issue is the coax connection between the antenna and your receiver. As mentioned, the "Cable" connection will not work as it is setup from the factory but may be able to be modified with an A/B switch to use with one or the other. If you are not familiar with your coach wiring you will need to talk to someone knowledgeable about your coach. You can see if there is a forum for your specific model RV or chat with a dealer about setting up this option. It's always best to run a new dedicated cable to ensure the best connections but not always necessary.
