Electric Jack for 5th wheel
Having an issue with our electric jack on the 5th wheel. When raising it..pressure on it... it starts to click and won't raise up. If I use some channel locks and turn the bar a bit..then press the bu...
Forum Discussion
Could be jack nut is slipping on jack screw (stripped threads)
Could be drive gear is slipping on large driven gear (broken tooth)
(Drive gear---small bevel gear motor turns. Driven gear====large bevel gear that turns jack screw/shaft)
Could be drive pins in either bevel gear
Take top cover off and have a look while trying to operate it.
Does it move if no pressure on it?
Most likely will need a rebuild.....kits available
Could be drive gear is slipping on large driven gear (broken tooth)
(Drive gear---small bevel gear motor turns. Driven gear====large bevel gear that turns jack screw/shaft)
Could be drive pins in either bevel gear
Take top cover off and have a look while trying to operate it.
Does it move if no pressure on it?
Most likely will need a rebuild.....kits available
